Type 89 grenade discharger

The Type 89 Grenade Discharger (八九式重擲弾筒, Hachikyū-shiki jū-tekidantō), inaccurately and colloquially known as a knee mortar by Allied forces, is a Japanese grenade launcher or light mortar that was widely used in the Pacific Theater of World War II. It got the nickname the “knee mortar” because of an erroneous Allied belief that these launchers could be fired by propping its plate against the leg. However, anyone trying to fire it this way would receive a severe bruise (or sometimes a broken thigh bone) from its hefty recoil.[1]

“Knee mortar” redirects here. For the other Japanese weapon also known as “knee mortar”, see Type 10 grenade discharger.
Light mortar
Type 89 Grenade Discharger

Type 89 Grenade Discharger with various grenades, shells, and accessories
Type Light mortar
Place of origin Empire of Japan
Service history
In service 1929–1945 (Japan)
Used by Imperial Japanese Army
Other users
Wars Soviet–Japanese border conflicts,
Second Sino-Japanese War,
World War II
Indonesian National Revolution
Malayan Emergency
Korean War
First Indochina War
Vietnam War
Mass 4.7 kg (10 lb 6 oz)
Length 610 mm (24 in)
Barrel length 254 mm (10 in)

Cartridge 793 g (1 lb 12 oz)
Caliber 50 mm (1.97 in)
Rate of fire 25 rpm
Effective firing range (Type 89 shell):
120 m (131 yd)
Maximum firing range (Type 89 shell):
670 m (732 yd)

. . . Type 89 grenade discharger . . .

The Japanese Army, noting that grenades were short-ranged weapons, began efforts to optimize these weapons for close-in infantry fighting. After studying employment of grenades and mortars on the battlefield, the Japanese Army developed hand grenades, rifle grenades, and grenade/mortar shell dischargers (small mortars) suited to warfare in typical short-range combat environments such as urban, trench, and jungle warfare.

As part of this effort, the Japanese Army had adopted by 1932 a set of fragmentation grenades with almost universal adaptability. The Type 91 fragmentation grenade could be thrown by hand, fired from a spigot-type launcher, or used in a mortar-like grenade discharger, the Type 89.[2]

The Type 89 Heavy Grenade Discharger was adopted in 1929 but production did not begin until 1932. It differs from the earlier Type 10 grenade discharger in that it has a rifled barrel. The Type 89 could fire two types of grenades or shells: the Type 91 Grenade, which was a normal infantry fragmentation grenade adapted to the Type 89 discharger, and the Type 89 50 mm shell, which was an impact-detonated shell with considerably more explosive power.

When fired from the Type 89 discharger, the Type 91 fragmentation grenade was fitted with a propellant base and time fuse. It did not explode upon contact, but was designed to ignite its fuse while in flight. A weak creep spring inside the grenade firing mechanism allowed the firing pin to be thrown back upon launching, igniting a time fuse with a 7-8 second delay. Using this system, the Type 91 grenades could be launched through jungle cover or through small openings without the danger of premature detonation in the event the grenade struck an object on its way to the target.[3] Although the Type 89 could be fired by a single person, it was typically operated with a crew of 3, enabling it to reach a rate of fire of about 25 rounds per minute.[4]

The Type 89 discharger could also be used with a more powerful impact-detonated shell approaching the power of a light mortar. Weighing approximately two pounds (approx. 900 g), it was known as the Type 89 50mm shell, and was made in high explosive (HE), incendiary and smoke variants. To fire the shell (which had a nose-mounted impact fuse that detonated on contact), it was dropped base-down inside the tube of the discharger. By setting the Type 89 discharger at a fixed angle of 45 degrees, and varying distance to target by adjusting the size of a variable chamber space inside the discharger mechanism (see also the Granatnik wz. 36), soldiers could adjust fire onto multiple targets at varying ranges while firing the contact-detonated 50 mm shell through a single small clearing in the jungle canopy.[5] The method worked equally well when firing from deep trenches or pits, or between various building obstructions when fighting inside a built-up town or city.[5]

With its curved support plate, the Type 89 was designed to be placed on the ground or against a log or trunk at a fixed firing angle of 45 degrees. However, since it used a spring-loaded, lanyard-operated firing pin mechanism, in an emergency it could fire grenades or shells at point targets while braced horizontally against a tree or building.

. . . Type 89 grenade discharger . . .

This article is issued from web site Wikipedia. The original article may be a bit shortened or modified. Some links may have been modified. The text is licensed under “Creative Commons – Attribution – Sharealike” [1] and some of the text can also be licensed under the terms of the “GNU Free Documentation License” [2]. Additional terms may apply for the media files. By using this site, you agree to our Legal pages . Web links: [1] [2]

. . . Type 89 grenade discharger . . .

Previous post Trinitarian formula
Next post Mack-Cali Realty Corporation